Here are some basic trouble shooting tips for new monitors:

1. The picture does not appear
   • Check to make sure the signal cable is firmly connected in the socket.
   • Check to see if the computer system’s power is ON.
   • Check that the Brightness Control is at the appropriate position, not at the minimum.
2. The Screen is not synchronized
   • Check to make sure the signal cable is firmly connected in the socket.
   • Check that the output level matches the input level of your computer.
   • Make sure the signal timing of the computer system is within the specification of the monitor.
3. The position of the screen is not in the center
   • Adjust the H-Size, H-Phase or V-Size, V-Center controls.
   • Check if the signal timing of the computer system is within the specification of the monitor.
4. The screen is too bright or too dark
   • Check that the Brightness Control is at the appropriate position, not at the minimum or maximum.
   • Check if the specified voltage is applied.
   • Check if the signal timing of the computer system is within the specification of the monitor.
   • Especially, check the horizontal frequency
5. The screen is shaking
   • Move all objects that emit a magnetic field, such as a motor or transformer, away from monitor.
   • Check if the specified voltage is applied.
   • Check if the signal timing of the computer system is within the specification of the monitor.

Hopefully these computer maintenance tips will keep you out of trouble. However, if you have problems with your computer, feel free to Call 98429 34340 or mail us